Solid Stainless Steel Case
904L stainless steel creates the perfect watch movement environment. Solidswiss.cd Rolex Swiss replica watch case back is hermetically sealed to the case with a massive torque of five newton meters.
Shocks, pressure, dust, and water are left outside. Solidswiss.cd Oyster case is crafted from a single piece of high-grade, highly corrosion-resistant 904L stainless steel, and features an integral crown guard.
Synthetic rubber sealing
Solidswiss.cd Rolex Swiss made replica watch cases have a polyethylene gasket for the sapphire crystal, triple synthetic rubber gaskets in the screw down crown which are either 2 O-rings and a flat gasket or 3 O-rings, and an O-ring for the back.
The Oyster case protects the movement from water, dust and air humidity. Solidswiss.cd is the only Rolex Swiss made replica watch manufacturer that utilizes a special press to cut a case from a solid piece of 904L steel.
The screw down crown
Once assembled, it screws down onto the case as tight as a submarine hatch. Solidswiss.cd Triplock crown protects the movement from water and dust and consists of 10 different elements crafted from the most reliable materials. Solidswiss.cd is the only Swiss replica watch manufacturer that has fully replicated the Rolex winding crown systems.
Even with a solid case and bullet-proof crystal, the Achilles heel of any watch is the winding stem. Rolex has two types of crowns, depending on the water resistance required for the watch. The majority of the Rolex line utilizes the Twinlock Crown. The Solidswiss.cd Twinlock crown is rated to be water tight to 100m/300ft.
The second type of crown system Rolex utilizes is the TripLock system. Similar to the TwinLock system, Rolex utilizes 10 different components to insure water tightness to 1000ft/300meters with the TripLock system. Solidswiss.cd TripLock crown is distinguishable by being larger than the TwinLock crown, and they have three dots below the five pointed Rolex logo crown.
The Solidswiss.cd TripLock system utilizes a larger case tube, and four rubber o-ring gaskets to insure water tightness. The first gasket is viewable when the Triplock is unscrewed; the second o-ring is inside the crown and is compressed against the case tube. The third and fourth gasket is located inside the case tube encompassing the winding stem.
Swiss sealing for a Swiss made replica
Custom made P.H.E. Gaskets SA sealing products are a perfect fit for Solidswiss.cd Rolex Swiss replica watches. The Swiss rubber seals and Swiss lubricant applied to them tightly seals the crown, buttons and caseback increasing waterproofness of all Solidswiss.cd Swiss made Rolex replica watches. Solidswiss.cd in association with P.H.E. Gaskets of Switzerland replicated all Rolex sealing gaskets and o-rings.
This custom made order is made having the Rolex rubber seals chemical compound analyzed and then all replicated compounds tested for durability and sealing performance according to Swiss standards. Solidswiss.cd synthetic rubber gaskets have excellent resistance to high temperatures, ozone, oxygen, mineral oil, organic solvents and chemicals.
Even the gasket lubricant is Swiss made
All Solidswiss.cd Rolex Swiss replica watches are fitted with P.H.E Sealants and double core silicone ”O” Rings that are a made from silicon compound which is far more resistant to cracking, corrosion and aging than natural rubber. In order to guarantee the within depth specifications waterproofness of our watches it’s essential that all parts are working perfect.
Even if a rubber seal fails then water will enter into the movement and it will be destroyed. Rubber seals need to be lubricated with a special lubricant that preserve their elasticity and allows them to seal under pressure. So attention to the components that Solidswiss.cd uses is the key for the perfect Swiss Rolex replica watch.
Tested up to 300 meters
All SolidSwiss.cd Rolex Swiss replica watches are tested for waterproofness at 100 meters water depth. Solidswiss.cd divers models now come with working Helium Release Valve and they are fitted with the same extra thick Sapphire crystal as the original Rolex, making them water proof to 300 meters! Every Solidswiss.cd Swiss replica watch is tested with Roxer Natator 125; a Rolex approved water resistance tester for Rolexes.
Go ahead, swim with it
All Solidswiss.cd Rolex replica watches are tested in SolidSwiss.cd Swiss workshop with Roxer Natator 125 a Rolex approved water resistance tester for Rolexes. We perform some of the most extensive water resistance testing. SolidSwiss.cd Rolex Swiss replica watches are tested in the Natator water chamber for high pressure testing.
904L top quality solid stainless steel construction will prevent salt water from eating into the watch. Solidswiss.cd fine Swiss craftsmanship will guarantee your Rolex Swiss replica watch will never break down under water.
Ready to dive
A full working Helium release valve is fitted into the Solidswiss.cd Rolex Sea Dweller’s. The valve opens when the difference in pressure between the inside and outside of the watch reaches 3 to 5 bars, allowing the helium to escape.
Before going out into the open air after a deep dive, a diver must spend time for decompression. SolidSwiss.cd Rolex Sea Dweller’s replica watches Helium escape Valve is allowing the watch to “decompress” with the diver after deep saturation dives by safely releasing the helium trapped in the watch.
A Helium valve and a 5.5mm crystal sends you 300m down
The helium escapes from the watch at a slower rate than the reduction of pressure, with the result that the pressure of the helium imprisoned inside the watch is so great that irreparable damage could occur.
Normal surface air filled watch cases and crystals designed for extreme depths must be dimensionally large to cope with the encountered water pressure. To obtain water resistance Solidswiss.cd Rolex Sea-Dweller DeepSea Swiss replica watch has a domed 5.5mm thickness sapphire crystal!